• Russian
  • Spain
  • Italy
  • France
  • Deutsch
  • English

Browse All Products

Mitsubishi Q-Series Programmable Logic Controllers

System Q PC and C Controller CPU overview


Specifications
Q00UJCPU Q00UCPU Q01UCPU Q02UCPU
Type Multi processor CPU module
I/O points 256/8192 1024/8192 1024/8192 2048/8192
CPU self-diagnostic functions CPU error detection,Watch Dog, battery error detection,memory error detection, programcheck, power supply error detection, fuse error detection
Battery buffer All CPU modules are fitted with a lithium-battery with a life expectancy of 5 years.
Memory type RAM, ROM, FLASH RAM, ROM, FLASH RAM, ROM, FLASH RAM, ROM, FLASH
Memory
capacity
overall ≤32 MByte ≤32 MByte ≤32 MByte ≤32 MByte
max. for PLC program 10 k steps (40 kByte) 10 k steps (40 kByte) 15 k steps (60 kByte) 20 k steps (80 kByte)
Program cycle period 120 ns/log. instruction 80 ns/log. instruction 60 ns/log. instruction 40 ns/log. instruction
Dimensions (WxHxD) mm 245x98x98 27.4x98x89.3 27.4x98x89.3 27.4x98x89.3

Specifications Q03UDCPU, Q03UDECPU Q04UDHCPU, Q04UDEHCPU Q06UDHCPU, Q06UDEHCPU Q10UDHCPU, Q10UDEHCPU
Type Multi processor CPU module
I/O points 3049/8192 4096/8192 4096/8192 4096/8192
CPU self-diagnostic functions CPU error detection,Watch Dog, battery error detection,memory error detection, programcheck, power supply error detection, fuse error detection
Battery buffer All CPU modules are fitted with a lithium-battery with a life expectancy of 5 years.
Memory type RAM, ROM, FLASH RAM, ROM, FLASH RAM, ROM, FLASH RAM, ROM, FLASH
Memory
capacity
overall ≤32 MByte ≤32 MByte ≤32 MByte ≤32 MByte
max. for PLC program 30 k steps (120 kByte) 40 k steps (160 kByte) 65 k steps (240 kByte) 100 k steps (400 kByte)
Program cycle period 20 ns/log. instruction 9.5 ns/log. instruction 9.5 ns/log. instruction 9.5 ns/log. instruction
Dimensions (WxHxD) mm 27.4x98x89.3 27.4x98x89.3 27.4x98x89.3 27.4x98x89.3

Specifications Q13UDHCPU, Q13UDEHCPU Q20UDHCPU, Q20UDEHCPU Q30UDHCPU, Q30UDEHCPU
Type Multi processor CPU module
I/O points 4096/8192 4096/8192 4096/8192
CPU self-diagnostic functions CPU error detection,Watch Dog, battery error detection,memory error detection, programcheck, power supply error detection, fuse error detection
Battery buffer All CPU modules are fitted with a lithium-battery with a life expectancy of 5 years.
Memory type RAM, ROM, FLASH RAM, ROM, FLASH RAM, ROM, FLASH
Memory
capacity
overall ≤32 MByte ≤32 MByte ≤32 MByte
max. for PLC program 130 k steps (520 kByte) 200 k steps (800 kByte) 260 k steps (1040 kByte)
Program cycle period 9.5 ns/log. instruction 9.5 ns/log. instruction 9.5 ns/log. instruction
Dimensions (WxHxD) mm 27.4x98x89.3 27.4x98x89.3 27.4x98x89.3

Specifications Q03UDVCPU Q04UDVCPU Q06UDVCPU Q13UDVCPU Q26UDVCPU
Type Multi processor CPU module
I/O points 4096/8192
CPU self-diagnostic functions CPU error detection, Watch Dog, battery error detection, memory error detection, program check, power supply error detection, fuse error detection
Battery buffer All CPU modules are fitted with a lithium-battery with a life expectancy of 5 years.
Memory type RAM, ROM, FLASH, SD-Card, extended SRAM cassette
Memory capacity for PLC program 30 k steps (120 kByte) 40 k steps (160 kByte) 60 k steps (240 kByte) 130 k steps (520 kByte) 260 k steps (1040 kByte)
Program cycle period 1.9 ns/log. instruction
Dimensions (WxHxD) 27.4x98x115 27.4x98x115 27.4x98x115 27.4x98x115 27.4x98x115

Type Basic PLC Advanced PLC
Model range Q00J – Q01 Q02 – Q25H
Total Inputs/Outputs 256 – 1024 / 2048 4096/8192
Memory Capacity 58 – 94 kB 32 MB
Program memory 8k steps – 14k steps 28k steps – 252k steps
Program cycle period per logical instruction 0,20 – 0,1 μs 79 – 34ns
Multi CPU capability (Max. 4 CPUs) Yes on Q00CPU and Q01CPU Yes – up to 4 per system

Process CPU overview

CPU Type Process CPU Redundant CPU
Model Q12PHCPU Q25PHCPU Q12PRHCPU Q25PRHCPU
Total Inputs/Outputs 4096/8192
Memory Capacity 32 MB
Program memory 124k steps 252k steps 124k steps 252k steps
Program cycle period per logical instruction 34ns
Multi CPU capability (Max. 4 CPUs) Yes – up to 4 per system No

CPU Module Performance Specifications


Item
Q02UCPU Q03UDCPU Q04UDHCPU Q06UDHCPU Q13UDHCPU Q26UDHCPU
Q03UDECPU dJ Q04UDEHCPU® Q06UDEHCPUCU Q13UDEHCPU® Q26UDEHCPU®00000
Control method Sequence program control method
I/O control mode Refresh
Program language (sequence control language) Relay symbol language (ladder), logic symbolic language (list), MELSAP3 (SFC), MELSAP-L, and structured text (ST)
Peripheral connection port USB(Note 6) Yes
RS-232 Yes Q03UDCPU Q04UDHCPU Q06UDHCPU Q13UDHCPU Q26UDHCPU
Ethernet
(100BASE-TX/10BASE-T)
No Q03UDECPU Q04UDEHCPU Q06UDEHCPU Q13UDEHCPU Q26UDEHCPU
Processing speed (sequence instruction)
(Note 1)
LD instruction 0.04 ms 0.02 ms 0.0095 ms
MOV instruction 0.08 ms 0.04 ms 0.019 ms
PC MIX value (instruction/us) (Note 2) 14 28 60
Floating point addition 0.18 ms 0.12 ms 0.057 ms
Total number of instructions (Note 3) 758 764
Operation (floating point operation) instruction Yes
Character string processing instruction Yes
PID instruction Yes
Special function instruction (Trigonometric function, square root, exponential operation, etc.) Yes
Constant scan (Function for keeping regular scan time) 0.5 to 2000 ms (setting available in units of 0.5 ms)
Program capacity 20 k steps        30 k steps        40 k steps        60 k steps        130 k steps 260 k steps
Number of I/O device points [X/Y] 8192 points
Number of I/O points [X/Y] 2048 points     4096 points
Internal relay [M] (Note 4) 8192 points
Latch relay [L] 8192 points
Link relay [B] 8192 points
Timer [T] 2048 points
Retentive timer [ST] 0 points
Counter [C] 1024 points
Data register [D] 12288 points
Link register [W] 8192 points
Annunciator [F] 2048 points
Edge relay [V] 2048 points
Link special relay [SB] 2048 points
Link special register [SW] 2048 points
File register [R, ZR] 65536 points (Nole 5 98304 points (Nole 5 131072 points (Nole 5 393216 points (Nole 51 524288 points (Nole 51 655360 points (Nole 5
Step relay [S] 8192 points
Index register/standard device register [Z] 20 points
Index register [Z]
(32-bit ZR indexing)
Max. 10 points (Z0 to Z18)
(Index register [Z] is used in double words.)
Pointer [P] 4096 points
Interrupt pointer [I] 256 points
Special relay [SM] 2048 points
Special register [SD] 2048 points
Function input [FX] 16 points
Function output [FY] 16 points
Function register [FD] 5 points
Local device Yes
Device initial values Yes
Note 1) The processing speed is the same even when the device is indexed.
Note 2) The PC MIX value is the average number of instructions such as the basic and data processing instructions executed in 1 us. A larger value indicates a higher processing speed.
Note 3) Intelligent function module dedicated instructions are not included.
Note 4) Indicates the number of points in the default state. This can be changed with the parameter.
Note 5) Indicates the number of points when using the built-in memory (standard RAM). This can be expanded with the SRAM card or Flash card.
(Writing from the program is not possible with the Flash card.) Up to 4184064 points can be used with the SRAM card.
Note 6) The USB port terminal is mini-B.

General Specifications

General specifications indicate the environmental specifications in which this product can be installed and operated. Unless otherwise specified, the general specifications apply to all products of the Q Series. Install and operate the Q Series products in the environment indicated in the general specifications.

Item
Specifications
Operating ambient temperature 0 to 55C
Storage ambient temperature -25 to 75C (Note 3)
Operating ambient humidity 5 to 95%RH(Note 4>, non-condensing
Storage ambient humidity 5 to 95%RH(Note 4>, non-condensing
Vibration resistance Conforms to JIS B 3502, IEC61131-2 Under intermittent vibration  Sweep count
Frequency Acceleration Amplitude
5 to 9 Hz 3.5 mm (0.14 in.)
9 to 150 Hz 9.8 m/s2 10 times each in X,
Under continuous vibration   Y, Z directions
Frequency Acceleration Amplitude      (for 80 min.)
5 to 9 Hz - 1.75 mm (0.069 in.)
9 to 150 Hz 4.9 m/s2 -
Shock resistance Conforms to JIS B 3502, IEC61131-2 (147m/s2, 3 times in each of 3 directions X, Y, Z)
Operating atmosphere No corrosive gases
Operating altitude (Note 5) 2000 m (6562 ft.) or less
Installation location Inside control panel
Overvoltage category (Note 1)
Pollution degree (Note 2)
II or less
2 or less
Equipment class Class I
Note 1) This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the machinery within premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for up to the rated voltage of 300 V is 2500 V.
Note 2) This index indicates the degree to which conductive material is generated in the environment where the equipment is used.
In pollution degree 2, only non-conductive pollution occurs. However, a temporary conductivity caused by condensation is to be expected.
Note 3) The storage ambient temperature is -20 to 75’C if the system includes the AnS Series modules.
Note 4) The operating ambient humidity and storage ambient humidity are 10 to 90%RH if the system includes the AnS Series modjes.
Note 5) Do not use or store the programmable controller under pressure higher than the atmospheric pressure of altitude 0 m. Doing so can cause a malfunction. When using the programmable controller under pressure, please consult your local Mitsubishi sales office or representative. Module Combinations for Multiple CPU System
◎ Possible
O Possible (multiple CPU high-speed communication not available)

Multiple CPU high speed main base unit


CPU 2 to 4
CPU 1
Universal model QCPU High performance model QCPU Motion CPU Process CPU PC CPU (Note 1)
New model Previous model
Q02UCPU Q03UD(E)CPU
Q04UD(E)HCPU
Q06UD(E)HCPU
Q13UD(E)HCPU
Q26UD(E)HCPU
Q02(H)CPU
Q06HCPU
Q12HCPU
Q25HCPU
Q172DCPU
Q173DCPU
Q172HCPU(-T)
Q173HCPU(-T)
Q172CPUN(-T)
Q173CPUN(-T)
Q02PHCPU
Q06PHCPU
Q12PHCPU
Q25PHCPU
Universal model QCPU Q02UCPU (Note 2) X X X X X X O (Note 3)
Q03UD(E)CPU
Q04UD(E)HCPU
Q06UD(E)HCPU
Q13UD(E)HCPU
Q26UD(E)HCPU
X O X O O (Note 3)
High performance model QCPU Q02(H)CPU
Q06HCPU
Q12HCPU
Q25HCPU
X O O X X O O (Note 3)

Main base unit


CPU 2 to 4
CPU 1
Universal model QCPU High performance model QCPU Motion CPU Process CPU ("e 7) PC CPU (Note 1-6)
New model Previous model (Note 6)
Q02UCPU Q03UD(E)CPU
Q04UD(E)HCPU
Q06UD(E)HCPU
Q13UD(E)HCPU
Q26UD(E)HCPU
Q02(H)CPU
Q06HCPU
Q12HCPU
Q25HCPU
Q172DCPU
Q173DCPU
Q172HCPU(-T)
Q173HCPU(-T)
Q172CPUN(-T)
Q173CPUN(-T)
Q02PHCPU
Q06PHCPU
Q12PHCPU
Q25PHCPU
Universal model QCPU Q02UCPU X X X X O (Note 4) X O (Note 3)
Q03UD(E)CPU
Q04UD(E)HCPU
Q06UD(E)HCPU
Q13UD(E)HCPU
Q26UD(E)HCPU
X O O X X O O (Note 3)
High performance model QCPU Q02(H)CPU
Q06HCPU
Q12HCPU
Q25HCPU
X O O X O (Note 5) O O (Note 3)
Note 1) For usable model name, version, etc., please contact your local Mitsubishi sales office or representative. Note 2) The Q02UCPU does not support multiple CPU high-speed communication.
Note 3) Only one PC CPU can be used.
Note 4) Only one motion CPU can be used.
Note 5) Cannot be used together with the Q03UD(E), Q04UD(E)H, Q06UD(E)H, Q13UD(E)H, or Q26UD(E)HCPU. Note 6) The slim type main base unit (Q3^SB) and redundant power main base unit (Q38RB) cannot be used. Note 7) The slim type main base unit (Q3^SB) cannot be used.

Comparison between built-in Ethernet port CPU and Ethernet module (QJ71E71-100)


Function/performance
Built-in Ethernet port CPU QnUDE(H)CPU Ethernet module QJ71E71-100
Communication speed 100 Mbps 100 Mbps
Communication with GX Developer Yes Yes
Communication with GOT Yes Yes
MC protocol communication Yes(No,e) Yes
Fixed buffer communication No Yes
Random access buffer communication No Yes
Communication by data link instruction No Yes
FTP server function Yes Yes
E-mail function No Yes

Note) QnA compatible 3E frame device memory access commands only.

Product List

Always refer to user's manuals for information on usable modules, restrictions, etc. before using.
Contact your local Mitsubishi sales office or representative for the latest information on the MELSOFT versions and compatible OS.

CPU, base, power supply


Product
Model Outline
CPU Q02UCPU No. of I/O points: 2048 points, no. of I/O device points: 8192 points, program capacity: 20 k steps, basic operation processing speed (LD instruction): 0.04 m s, program memory capacity: 80 KB, peripheral connection ports: USB and RS232, with memory card I/F
Q03UDCPU No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 30 k steps,
basic operation processing speed (LD instruction): 0.02 m s, program memory capacity: 120 KB,
multiple CPU high-speed communication, peripheral connection ports: USB and RS232, with memory card I/F
Q04UDHCPU No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 40 k steps, basic operation processing speed (LD instruction): 0.0095 ms, program memory capacity: 160 KB, multiple CPU high-speed communication, peripheral connection ports: USB and RS232, with memory card I/F
Q06UDHCPU No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 60 k steps, basic operation processing speed (LD instruction): 0.0095 ms, program memory capacity: 240 KB, multiple CPU high-speed communication, peripheral connection ports: USB and RS232, with memory card I/F
Q13UDHCPU No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 130 k steps,
basic operation processing speed (LD instruction): 0.0095 ms, program memory capacity: 520 KB,
multiple CPU high-speed communication, peripheral connection ports: USB and RS232, with memory card I/F
Q26UDHCPU No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 260 k steps, basic operation processing speed (LD instruction): 0.0095 ms, program memory capacity: 1040 KB, multiple CPU high-speed communication, peripheral connection ports: USB and RS232, with memory card I/F
Q03UDECPU No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 30 k steps,
basic operation processing speed (LD instruction): 0.02 m s, program memory capacity: 120 KB,
multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, with memory card I/F
Q04UDEHCPU No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 40 k steps, basic operation processing speed (LD instruction): 0.0095 ms, program memory capacity: 160 KB, multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, with memory card I/F
Q06UDEHCPU No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 60 k steps, basic operation processing speed (LD instruction): 0.0095 ms, program memory capacity: 240 KB, multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, with memory card I/F
Q13UDEHCPU No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 130 k steps,
basic operation processing speed (LD instruction): 0.0095 ms, program memory capacity: 520 KB,
multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, with memory card I/F
Q26UDEHCPU No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 260 k steps,
basic operation processing speed (LD instruction): 0.0095 ms, program memory capacity: 1040 KB,
multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, with memory card I/F
Battery Q6BAT Replacement battery
Q7BAT Replacement large-capacity battery
Q7BAT-SET Large-capacity battery with holder for mounting CPU
Q8BAT Replacement large-capacity battery module
Q8BAT-SET Large-capacity battery module with CPU connection cable
Memory card Q2MEM-1MBS SRAM memory card, capacity: 1 MB
Q2MEM-2MBS SRAM memory card, capacity: 2 MB
Q3MEM-4MBS SRAM memory card, capacity: 4 MB
Q3MEM-4MBS-SET SRAM memory card with cover, capacity: 4 MB
Q3MEM-8MBS SRAM memory card, capacity: 8 MB
Q3MEM-8MBS-SET SRAM memory card with cover, capacity: 8 MB
Q2MEM-2MBF Linear Flash memory card, capacity: 2 MB
Q2MEM-4MBF Linear Flash memory card, capacity: 4 MB
Q2MEM-8MBA ATA card, capacity: 8 MB
Q2MEM-16MBA ATA card, capacity: 16 MB
Q2MEM-32MBA ATA card, capacity: 32 MB
Memory card adapter Q2MEM-ADP Adapter for Q2MEM memory card's standard PCMCIA slot
SRAM card battery Q2MEM-BAT Replacement battery for Q2MEM-1MBS and Q2MEM-2MBS
Q3MEM-BAT Replacement battery for Q3MEM-4MBS and Q3MEM-8MBS
Connection cable QC30R2 RS-232 cable for connecting personal computer and CPU, 3 m (between mini-DIN6P and Dsub9P)
Cable disconnection prevention holder Q6HLD-R2 Holder for preventing RS-232 cable (programmable controller CPU connection) disconnection
Base Main base Q33B 3 slots, 1 power supply module required, for Q Series modules
Q35B 5 slots, 1 power supply module required, for Q Series modules
Q38B 8 slots, 1 power supply module required, for Q Series modules
Q312B 12 slots, 1 power supply module required, for Q Series modules
Slim type main base Q32SB 2 slots, 1 slim type power supply module required, for Q Series modules
Q33SB 3 slots, 1 slim type power supply module required, for Q Series modules
Q35SB 5 slots, 1 slim type power supply module required, for Q Series modules
Redundant power main base Q38RB 8 slots, 2 redundant power supply modules required, for Q Series modules

CPU, base, power supply


Product
Model Outline
Base Multiple CPU high speed main base Q38DB 8 slots, 1 power supply module required, for Q Series modules
Q312DB 12 slots, 1 power supply module required, for Q Series modules
Extension base 3 slots, 1 power supply module required, for Q Series modules
Q65B 5 slots, 1 power supply module required, for Q Series modules
Q68B 8 slots, 1 power supply module required, for Q Series modules
Q612B 12 slots, 1 power supply module required, for Q Series modules
Q52B 2 slots, power supply module not required, for Q Series modules
Q55B 5 slots, power supply module not required, for Q Series modules
Redundant power extension base Q68RB 8 slots, 2 redundant power supply modules required, for Q Series modules
Extension cable QC05B 0.45 m cable for connecting extension base unit
QC06B 0.6 m cable for connecting extension base unit
QC12B 1.2 m cable for connecting extension base unit
QC30B 3 m cable for connecting extension base unit
QC50B 5 m cable for connecting extension base unit
QC100B 10 m cable for connecting extension base unit
Adapter Q6DIN1 DIN rail mounting adapter for Q38B, Q312B, Q68B, Q612B, Q38RB, Q68RB, Q65WRB, Q38DB, and Q312DB
Q6DIN2 DIN rail mounting adapter for Q35B, Q65B, and Q00JCPU
Q6DIN3 DIN rail mounting adapter for Q32SB, Q33SB, Q35SB, Q33B, Q52B, Q55B, and Q63B
Q6DIN1A DIN rail mounting adapter (with vibration-proofing bracket set) for Q3QJB, Q5G B, Q6G B, Q38RB, Q68RB, and Q65WRB
Blank cover QG60 Blank cover for I/O slot
Power supply Q61P Input voltage: 100 to 240 V AC output voltage: 5 V DC output current: 6 a
Q62P Input voltage: 100 to 240 V AC, output voltage: 5/24 V DC, output current: 3/0.6 A
Q63P Input voltage: 24 V DC, output voltage: 5 V DC, output current: 6 A
Q64PN (Note 8) Input voltage: 100 to 240 V AC, output voltage: 5 V DC, output current: 8.5 A
Slim type power supply Q61SP Input voltage: 100 to 240 V AC, output voltage: 5 V DC, output current: 2 A
Redundant power supply Q63RP Input voltage: 24 V DC, output voltage: 5 V DC, output current: 8.5 A
Q64RP Input voltage: 100 to 120/200 to 240 V AC, output voltage: 5 V DC, output current: 8.5 A

I/O module


Input
AC QX10 16 points, 100 to 120 V AC, 8 mA (100 V AC, 60 Hz)/7 mA (100 V AC, 50 Hz), response time: 20 ms, 16 points/common,
18-point terminal block
QX28 8 points, 100 to 240 V AC, 17 mA (200 V AC, 60 Hz)/14 mA (200 V AC, 50 Hz)/8 mA (100 V AC, 60 Hz)/7 mA (100 V AC, 50 Hz), response time: 20 ms, 8 points/common, 18-point terminal block
DC (Positive common) (Note 1) QX40 16 points, 24 V DC, 4 mA, response time: 1/5/10/20/70 ms, 16 points/common, positive common, 18-point terminal block
QX40-S1 16 points, 24 V DC, 6 mA, response time: 0.1/0.2/0.4/0.6/1 ms, 16 points/common, positive common, 18-point terminal block
QX41(Note 2) 32 points, 24 V DC, 4 mA, response time: 1/5/10/20/70 ms, 32 points/common, positive common, 40-pin connector
QX41-S1 (Note 2) 32 points, 24 V DC, 4 mA, response time: 0.1/0.2/0.4/0.6/1 ms, 32 points/common, positive common, 40-pin connector
QX42(Note 2) 64 points, 24 V DC, 4 mA, response time: 1/5/10/20/70 ms, 32 points/common, positive common, 40-pin connector
QX42-S1 (Note 2) 64 points, 24 V DC, 4 mA, response time: 0.1/0.2/0.4/0.6/1 ms, 32 points/common, positive common, 40-pin connector
AC/DC (Note 1) QX50 16 points, 48 V AC/DC, 4 mA, response time: 20 ms, 16 points/common, positive/negative common, 18-point terminal block
DC sensor (Note 1) QX70 16 points, 5/12 V DC, 1.2 mA (5 V DC)/3.3 mA (12 V DC), response time: 1/5/10/20/70 ms, 16 points/common, positive/negative common, 18-point terminal block
QX71 32 points, 5/12 V DC, 1.2 mA (5 V DC)/3.3 mA (12 V DC), response time: 1/5/10/20/70 ms, 32 points/common, positive/negative common, 40-pin connector
QX72 64 points, 5/12 V DC, 1.2 mA (5 V DC)/3.3 mA (12 V DC), response time: 1/5/10/20/70 ms, 32 points/common, positive/negative common, 40-pin connector
DC (Negative common) (Note 1) QX80 16 points, 24 V DC, 4 mA, response time: 1/5/10/20/70 ms, 16 points/common, negative common, 18-point terminal block
QX81(Note 3) 32 points, 24 V DC, 4 mA, response time: 1/5/10/20/70 ms, 32 points/common, negative common, 37-pin D-sub connector
QX82(Note 2) 64 points, 24 V DC, 4 mA, response time: 1/5/10/20/70 ms, 32 points/common, negative common, 40-pin connector

QX82-S1 (Note 2) 64 points, 24 V DC, 4 mA, response time: 0.1/0.2/0.4/0.6/1 ms, 32 points/common, negative common, 40-pin connector
Output Relay QY10 16 points, 24 V DC/240 V AC, 2 A/point, 8 A/common, response time: 12 ms, 16 points/common, 18-point terminal block
QY18A 8 points, 24 V DC/240 V AC, 2 A/point, response time: 12 ms, 18-point terminal block, all points independent
Triac QY22 16 points; 100 to 240 V AC; 0.6 A/point; 4.8 A/common; minimum load voltage/current: 24 V AC/100 mA, 100 to 240 V AC/25 mA; response time: 1 ms + 0.5 cycle, 16 points/common, 18-point terminal block, with surge suppressor
Transistor (Sink) QY40P 16 points, 12 to 24 V DC, 0.1 A/point, 1.6 A/common, response time: 1 ms, 16 points/common, sink type, 18-point terminal block, with thermal and short-circuit protection and surge suppressor
QY41P (Note 2) 32 points, 12 to 24 V DC, 0.1 A/point, 2 A/common, response time: 1 ms, 32 points/common, sink type, 40-pin connector, with thermal and short-circuit protection and surge suppressor
QY42P (Note 2) 64 points, 12 to 24 V DC, 0.1 A/point, 2 A/common, response time: 1 ms, 32 points/common, sink type, 40-pin connector, with thermal and short-circuit protection and surge suppressor
QY50 16 points, 12 to 24 V DC, 0.5 A/point, 4 A/common, response time: 1 ms, 16 points/common, sink type,18-point terminal block, with surge suppressor and fuse

I/O module


Product
Model Outline
Output Transistor
(Independent)
QY68A 8 points, 5 to 24 V DC, 2 A/point, 8 A/module, response time: 10 ms, sink/source type, 18-point terminal block, with surge suppressor, all points independent
TTL CMOS QY70 16 points, 5 to 12 V DC, 16 mA/point, 256 mA/common, response time: 0.5 ms, 16 points/common, sink type,
18-point terminal block, with fuse
QY71 (Note 2) 32 points, 5 to 12 V DC, 16 mA/point, 512 mA/common, response time: 0.5 ms, 32 points/common, sink type, 40-pin connector, with fuse
Transistor (Source) QY80 16 points, 12 to 24 V DC, 0.5 A/point, 4 A/common, response time: 1 ms, 16 points/common, source type,18-point terminal block, with surge suppressor and fuse
QY81P (Note 3) 32 points, 12 to 24 V DC, 0.1 A/point, 2 A/common, response time: 1 ms, 32 points/common, source type, 37-pin D-sub connector, with thermal and short-circuit protection and surge suppressor
I/O DC input/ transistor output QH42P (Note 2) Input: 32 points, 24 V DC, 4 mA, response time: 1/5/10/20/70 ms, 32 points/common, positive common; output: 32 points, 12 to 24 V DC, 0.1 A/point, 2 A/common, response time: 1 ms, 32 points/common, sink type;
40-pin connector, with thermal and short-circuit protection and surge suppressor
QX48Y57 Input: 8 points, 24 V DC, 4 mA, response time: 1/5/10/20/70 ms, 8 points/common, positive common; output: 7 points, 12 to 24 V DC, 0.5 A/point, 2 A/common, response time: 1 ms, 7 points/common, sink type;
18-point terminal block, with surge suppressor and fuse
QX41Y41P (Note 2) Input: 32 points, 24 V DC, 4 mA, response time: 1/5/10/20/70 ms, 32 points/common, positive common; output: 32 points, 12 to 24 V DC, 0.1 A/point, 2 A/common, response time: 1 ms, 32 points/common, sink type;
40-pin connector, with thermal and short-circuit protection and surge suppressor
Interrupt module QI60 16 points, 24 V DC, 4 mA, response time: 0.1/0.2/0.4/0.6/1 ms, 16 points/common, 18-point terminal block
Connector A6CON1 40-pin connector, soldering type
A6CON2 40-pin connector, crimp-contact type
A6CON3 40-pin connector, IDC for flat cables
A6CON4 40-pin connector, soldering type (cable connectable in bidirection)
A6CON1E 37-pin D-sub connector, soldering type
A6CON2E 37-pin D-sub connector, crimp-contact type
A6CON3E 37-pin D-sub connector, IDC for flat cables
Spring clamp terminal block Q6TE-18S For 16-point I/O modules, 0.3 to 1.5 mm2 (22 to 16 AWG)
Terminal block adapter Q6TA32 For 32-point I/O modules, 0.5 mm2 (20 AWG)
Q6TA32-TOL Q6TA32 dedicated tool
Connector/terminal block
conversion module
A6TBXY36 For positive common input modules and sink output modules (standard type)
A6TBXY54 For positive common input modules and sink output modules (2-wire type)
A6TBX70 For positive common input modules (3-wire type)
A6TBX36-E For negative common input modules (standard type)
A6TBX54-E For negative common input modules (2-wire type)
A6TBX70-E For negative common input modules (3-wire type)
A6TBY36-E For source output modules (standard type)

A6TBY54-E For source output modules (2-wire type)
Cable AC05TB For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type); 0.5 m
AC10TB For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type); 1 m
AC20TB For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type); 2 m
AC30TB For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type); 3 m
AC50TB For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type); 5 m
AC80TB For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type); 8 m *Common current 0.5 A or lower
AC100TB For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type); 10 m *Common current 0.5 A or lower
AC05TB-E For A6TBX36-E, A6TBY36-E, A6TBX54-E, A6TBY54-E, and A6TBX70-E (negative common/source type); 0.5 m
AC10TB-E For A6TBX36-E, A6TBY36-E, A6TBX54-E, A6TBY54-E, and A6TBX70-E (negative common/source type); 1 m
AC20TB-E For A6TBX36-E, A6TBY36-E, A6TBX54-E, A6TBY54-E, and A6TBX70-E (negative common/source type); 2 m
AC30TB-E For A6TBX36-E, A6TBY36-E, A6TBX54-E, A6TBY54-E, and A6TBX70-E (negative common/source type); 3 m
AC50TB-E For A6TBX36-E, A6TBY36-E, A6TBX54-E, A6TBY54-E, and A6TBX70-E (negative common/source type); 5 m
Relay term inal module A6TE2-16SRN For 40-pin connector 24 V DC transistor output modules (sink type)
Cable AC06TE For A6TE2-16SRN, 0.6 m
AC10TE For A6TE2-16SRN, 1 m
AC30TE For A6TE2-16SRN, 3 m
AC50TE For A6TE2-16SRN, 5 m
AC100TE For A6TE2-16SRN, 10 m

Analog I/O module


Model Outline
Analog input Voltage input Q68ADV 8 channels; input: -10 to 10 V DC; output (resolution): 0 to 4000, -4000 to 4000, 0 to 12000, -12000 to 12000, 0 to 16000,
-16000 to 16000; conversion speed: 80 ws/channel; 18-point terminal block
Current input Q62AD-DGH 2 channels; input: 4 to 20 mA DC; output (resolution): 0 to 32000, 0 to 64000; conversion speed: 10 ms/2 channels;
18-point terminal block; channel isolated; supplies power to 2-wire transmitter
Q66AD-DG (Note 5) 6 channels; input: 4 to 20 mA DC (when 2-wire transmitter is connected), 0 to 20 mA DC; output (resolution): 0 to 4000, 0 to 12000; conversion speed: 10 ms/channel; 40-pin connector; channel isolated; supplies power to 2-wire transmitter
Q68ADI 8 channels; input: 0 to 20 mA DC; output (resolution): 0 to 4000, -4000 to 4000, 0 to 12000, -12000 to 12000, 0 to 16000,
-16000 to 16000; conversion speed: 80 ws/channel; 18-point terminal block
Voltage/current
input
Q64AD 4 channels; input: -10 to 10 V DC, 0 to 20 mA DC; output (resolution): 0 to 4000, -4000 to 4000, 0 to 12000, -12000 to 12000,
0 to 16000, -16000 to 16000; conversion speed: 80 ws/channel; 18-point terminal block
Q64AD-GH 4 channels; input: -10 to 10 V DC, 0 to 20 mA DC; output (resolution): 0 to 32000, -32000 to 32000, 0 to 64000, -64000 to 64000; conversion speed: 10 ms/4 channels; 18-point terminal block, channel isolated
(Note 5)
Q68AD-G
8 channels; input: -10 to 10 V DC, 0 to 20 mA DC; output (resolution): 0 to 4000, -4000 to 4000, 0 to 12000, -12000 to 12000,
0 to 16000, -16000 to 16000; conversion speed: 10 ms/channel; 40-pin connector, channel isolated
Analog output Voltage output Q68DAVN 8 channels; input (resolution): 0 to 4000, -4000 to 4000, 0 to 12000, -12000 to 12000, -16000 to 16000; output: -10 to 10 V DC; conversion speed: 80 ws/channel; 18-point terminal block, transformer isolation between power supply and output
Current output Q68DAIN 8 channels; input (resolution): 0 to 4000, -4000 to 4000, 0 to 12000, -12000 to 12000; output: 0 to 20 mA DC; conversion speed: 80 ws/channel; 18-point terminal block, transformer isolation between power supply and output
Voltage/current
output
Q62DAN 2 channels; input (resolution): 0 to 4000, -4000 to 4000, 0 to 12000, -12000 to 12000, -16000 to 16000; output: -10 to 10 V DC, 0 to 20 mA DC; conversion speed: 80 w s/channel; 18-point terminal block, transformer isolation between power supply and output
Q62DA-FG 2 channels; input (resolution): 0 to 12000, -12000 to 12000, -16000 to 16000; output: -12 to 12 V DC, 0 to 22 mA DC; conversion speed: 10 ms/2 channels; 18-point terminal block; channel isolated
Q64DAN 4 channels; input (resolution): 0 to 4000, -4000 to 4000, 0 to 12000, -12000 to 12000, -16000 to 16000; output: -10 to 10 V DC, 0 to 20 mA DC; conversion speed: 80 ws/channel; 18-point terminal block; transformer isolation between power supply and output
Q66DA-G(Note 5) 6 channels; input (resolution): 0 to 4000, -4000 to 4000, 0 to 12000, -12000 to 12000, -16000 to 16000; output: -12 to 12 V DC, 0 to 22 mA DC; conversion speed: 6 ms/channel; 40-pin connector; channel isolated
Temperature
input
RTD Q64RD 4 channels, platinum RTD (Pt100 [JIS C1604-1997, IEC 751 1983], JPt100 [JIS C1604-1981]), conversion speed: 40 ms/channel, 18-point terminal block
Q64RD-G 4 channels, RTD (Pt100 [JIS C1604-1997, IEC 751 1983], JPt100 [JIS C1604-1981], Ni100 [DIN43760 1987]), conversion speed: 40 ms/channel, 18-point terminal block, channel isolated
8 channels, RTD (3-wire type, Pt100 [JIS C1604-1997, IEC 751 1983], JPt100 [JIS C1604-1981]), Ni100 [DIN43760 1987]), conversion speed: 320 ms/channel, 40-pin connector, channel isolated
Thermocouple Q64TD 4 channels, thermocouple (JIS C1602-1995), conversion speed: 40 ms/channel, 18-point terminal block
Q64TDV-GH 4 channels, thermocouple (JIS C1602-1995), micro voltage (-100 to 100 mV), conversion speed: sampling cycle x 3, sampling cycle: 20 ms/channel, 18-point terminal block
(Note 5, 7)
Q68TD-G-H01
8 channels, thermocouple (JIS C1602-1995, IEC 60584-1 [1995], IEC 60584-2 [1982]), conversion speed: 320 ms/8 channels, 40-pin connector
Temperature
control
Platinum RTD Q64TCRT 4 channels, platimum RTD (Pt100, JPt100), no heater disconnection detection, sampling cycle: 0.5 s/4 channels,
18-point terminal block
Q64TCRTBW 4 channels, platimum RTD (Pt100, JPt100), with heater disconnection detection, sampling cycle: 0.5 s/4 channels, two 18-point terminal blocks
Thermocouple Q64TCTT 4 channels, thermocouple (K, J, T, B, S, E, R, N, U, L, PLII, W5Re/W26Re), no heater disconnection detection, sampling cycle: 0.5 s/4 channels, 18-point terminal block
Q64TCTTBW 4 channels, thermocouple (K, J, T, B, S, E, R, N, U, L, PLII, W5Re/W26Re), with heater disconnection detection, sampling cycle: 0.5 s/4 channels, two 18-point terminal blocks
Loop control Q62HLC 2 channels, input: thermocouple/micro voltage/voltage/current, conversion speed (input): 25 ms/2 channels, sampling cycle: 25 ms/2 channels; output: 4 to 20 mA DC, conversion speed (output): 25 ms/2 channels;
18-point terminal block, with 5 PID control modes

Pulse I/O and positioning module

Channel isolated pulse input QD60P8-G 8 channels, 30 kpps/10 kpps/1 kpps/ 100 pps/ 50 pps/ 10 pps/ 1 pps/0.1 pps, count input signal: 5/12 to 24 V DC
(Note 2)
QD62
2 channels; 200/100/10 kpps; count input signal: 5/12/24 V DC; external input: 5/12/24 V DC; coincidence output: transistor (sink), 12/24 V DC, 0.5 A/point, 2 A/common; 40-pin connector
QD62D (Note 2) 2 channels; 500/200/100/10 kpps; count input signal: EIA standards RS-422-A (differential line driver), external input: 5/12/24V DC; coincidence output: transistor (sink), 12/24 V DC, 0.5 A/point, 2 A/common; 40-pin connector
High-speed counter QD62E (Note 2) 2 channels; 200/100/10 kpps; count input signal: 5/12/24 V DC; external input: 5/12/24 V DC; coincidence output: transistor (source), 12/24 V DC, 0.1 A/point, 0.4 A/common; 40-pin connector
QD63P6 (Note 4) 6 channels, 200/100/10 kpps, count input signal: 5 V DC, 40-pin connector
QD64D2 (Note 4) 2 channels; 4 Mpps; count input signal: EIA standards RS-422-A (differential line driver); external input: 24 V DC; coincidence output: transistor (sink), 12/24 V DC, 0.5 A/point, 2 A/common; 40-pin connector

Product Model Outline
Positioning Open collector output
(Note 4)
QD75P1 1 axis; control unit: mm, inch, degree, pulse; no. of positioning data: 600/axis; max. output pulse: 200 kpps; 40-pin connector
QD75P2 2 axes; 2-axis linear interpolation, 2-axis circular interpolation; control unit: mm, inch, degree, pulse; no. of positioning data: 600/axis; max. output pulse: 200 kpps; 40-pin connector
QD75P4 4 axes; 2-/3-/4-axis linear interpolation, 2-axis circular interpolation; control unit: mm, inch, degree, pulse; no. of positioning data: 600/axis; max. output pulse: 200 kpps; 40-pin connector
QD70P4 4 axes, control unit: pulse, no. of positioning data: 10/axis, max. output pulse: 200 kpps, 40-pin connector
QD70P8 8 axes, control unit: pulse, no. of positioning data: 10/axis, max. output pulse: 200 kpps, 40-pin connector
Differential output
(Note 4)
QD75D1 1 axis; control unit: mm, inch, degree, pulse; no. of positioning data: 600/axis; max. output pulse: 1 Mpps; 40-pin connector
QD75D2 2 axes; 2-axis linear interpolation, 2-axis circular interpolation; control unit: mm, inch, degree, pulse; no. of positioning data: 600/axis; max. output pulse: 1 Mpps; 40-pin connector
QD75D4 4 axes; 2-/3-/4-axis linear interpolation, 2-axis circular interpolation; control unit: mm, inch, degree, pulse; no. of positioning data: 600/axis; max. output pulse: 1 Mpps; 40-pin connector
QD70D4 4 axes, control unit: pulse, no. of positioning data: 10/axis, max. output pulse: 4 Mpps, 40-pin connector
QD70D8 8 axes, control unit: pulse, no. of positioning data: 10/axis, max. output pulse: 4 Mpps, 40-pin connector
With SSCNET
connectivity
(Note 2)
QD75M1 1 axis; control unit: mm, inch, degree, pulse; no. of positioning data: 600/axis; 40-pin connector
QD75M2 2 axes; 2-axis linear interpolation, 2-axis circular interpolation; control unit: mm, inch, degree, pulse; no. of positioning data: 600/axis; 40-pin connector
QD75M4 4 axes; 2-/3-/4-axis linear interpolation, 2-axis circular interpolation; control unit: mm, inch, degree, pulse; no. of positioning data: 600/axis; 40-pin connector
With SSCNET III
connectivity
(Note 2)
QD75MH1 1 axis; control unit: mm, inch, degree, pulse; no. of positioning data: 600/axis; 40-pin connector; with SSCNET III connectivity
QD75MH2 2 axes; 2-axis linear interpolation, 2-axis circular interpolation; control unit: mm, inch, degree, pulse; no. of positioning data: 600/axis; 40-pin connector; with SSCNET III connectivity
QD75MH4 4 axes; 2-/3-/4-axis linear interpolation, 2-axis circular interpolation; control unit: mm, inch, degree, pulse; no. of positioning data: 600/axis; 40-pin connector; with SSCNET III connectivity
Open collector output with built-in counter function
(Note 4)
QD72P3C3 Positioning: 3 axes, control unit: pulse, no. of positioning data: 1/axis, max. output pulse: 100 kpps, counter: 3 channels, 100 kpps, count input signal: 5/24 V DC, 40-pin connector

PC interface board

MES interface QJ71MES96 MES interface module *MX MESInterface and CompactFlash card are required.
Option GT05-MEM-128MC 128 MB CompactFlash card
GT05-MEM-256MC 256 MB CompactFlash card
QJ71E71-100 10BASE-T/100BASE-TX
Ethernet QJ71E71-B2 10BASE2
QJ71E71-B5 10BASE5
QJ71C24N RS-232: 1 channel, RS-422/485: 1 channel, total transmission speed of 2 channels: 230.4 kbps
Serial communication QJ71C24N-R2 RS-232: 2 channels, total transmission speed of 2 channels: 230.4 kbps
QJ71C24N-R4 RS-422/485: 2 channels, total transmission speed of 2 channels: 230.4 kbps
QD51 BASIC program execution module, RS-232: 2 channels
Intelligent communication QD51-R24 BASIC program execution module, RS-232: 1 channel, RS-422/485: 1 channel
SWQVD-AD51HP <Note 6 Software package for QD51, AD51H-S3, and A1SD51S

Information module

CC-Link IE Controller Network QJ71GP21-SX Multi-mode fiber optic cable, dual loop, controller network (control/normal station)
QJ71GP21S-SX Multi-mode fiber optic cable, dual loop, controller network (control/normal station), with external power supply function
MELSECNET/H SI/QSI fiber optic
cable
QJ71LP21-25 SI/QSI/H-PCF/ broadband H-PCF fiber optic cable, dual loop,
controller network (control/normal station) or remote I/O network (remote mater station)
QJ71LP21S-25 SI/QSI/H-PCF/ broadband H-PCF fiber optic cable, dual loop,
controller network (control/normal station) or remote I/O network (remote mater station), with external power supply function
QJ72LP25-25 SI/QSI/H-PCF/ broadband H-PCF fiber optic cable, dual loop, remote I/O network (remote I/O station)
GI-50/125 fiber optic cable QJ71LP21G GI-50/125 fiber optic cable, dual loop, controller network (control/normal station) or remote I/O network (remote master station)
QJ72LP25G GI-50/125 fiber optic cable, dual loop, remote I/O network (remote I/O station)
GI-62.5/125
fiber optic cable
QJ71LP21GE GI-62.5/125 fiber optic cable, dual loop, controller network (control/normal station) or remote I/O network (remote master station)
QJ72LP25GE GI-62.5/125 fiber optic cable, dual loop, remote I/O network (remote I/O station)
Coaxial cable QJ71BR11 3C-2V/5C-2V coaxial cable, single bus, controller network (control/normal station) or remote I/O network (remote master station)
QJ72BR15 3C-2V/5C-2V coaxial cable, single bus, remote I/O network (remote I/O station)
CC-Link QJ61BT11N Master/local station, CC-Link Ver. 2 compatible
CC-Link/LT QJ61CL12 Master station
FL-net
(OPCN-2)
Ver. 2 QJ71FL71-T-F01 10BASE-T, 100BASE-TX
QJ71FL71-B2-F01 10BASE-2
QJ71FL71-B5-F01 10BASE-5
Ver. 1 QJ71FL71-T 10BASE-T
QJ71FL71-B2 10BASE-2
QJ71FL71-B5 10BASE-5
AS-i QJ71AS92 Master station, AS-Interface Specification Version 2.11 compatible

Control network module

Product Model Outline
CC-Link IE Controller Network Q80BD-J71GP21-SX PCI bus, Japanese/English OS compatible, multi-mode fiber optic cable, dual loop, controller network (control/normal station)
Q80BD-J71GP21S-SX PCI bus, Japanese/English OS compatible, multi-mode fiber optic cable, dual loop, controller network (control/normal station), with external power supply function
MELSECNET/H
(10)
SI/QSI fiber optic cable Q81BD-J71LP21-25 B PCI Express bus, Japanese/English OS compatible, multi-mode fiber optic cable, dual loop, controller network (control/normal station)
Q80BD-J71LP21-25 PCI bus, Japanese/English OS compatible, SI/QSI/H-PCF/broadband H-PCF fiber optic cable, dual loop, controller network (control/normal station)
Q80BD-J71LP21S-25 PCI bus, Japanese/English OS compatible, SI/QSI/H-PCF/broadband H-PCF fiber optic cable, dual loop, controller network (control/normal station), with external power supply function
GI-50/125
fiber optic
cable
Q80BD-J71LP21G PCI bus, Japanese/English OS compatible, GI-50/125 fiber optic cable, dual loop, controller network (control/normal station)
GI-62.5/125
fiber optic
cable
Q80BD-J71LP21GE PCI bus, Japanese/English OS compatible, GI-62.5/125 fiber optic cable, dual loop, controller network (control/normal station)
Coaxial
cable
Q80BD-J71BR11 PCI bus, Japanese/English OS compatible, 3C-2V/5C-2V coaxial cable, single bus, controller network (control/normal station)
CC-Link Q81BD-J61BT11              B PCI Express bus, Japanese/English OS compatible, master/local interface board, CC-Link Ver. 2 compatible
Q80BD-J61BT11N PCI bus, Japanese/English OS compatible, master/local interface board, CC-Link Ver. 2 compatible

MELSOFT GX Series

GX Developer SW^D5C-GPPW-E MELSEC programmable controller programming software
SW^D5C-GPPW-EV MELSEC programmable controller programming software (upgrade)
GX Configurator-AD SW^D5C-QADU-E MELSEC-Q dedicated analog to digital conversion module setting/monitoring tool
GX Configurator-DA SW^D5C-QDAU-E MELSEC-Q dedicated digital to analog conversion module setting/monitoring tool
GX Configurator-SC SW^D5C-QSCU-E MELSEC-Q dedicated serial communication module setting/monitoring tool
GX Configurator-CT SW^D5C-QCTU-E MELSEC-Q dedicated high-speed counter module setting/monitoring tool
GX Configurator-TC SW^D5C-QTCU-E MELSEC-Q dedicated temperature control module setting/monitoring tool
GX Configurator-TI SW^D5C-QTIU-E MELSEC-Q dedicated temperature input module setting/monitoring tool
GX Configurator-FL SW^D5C-QFLU-E MELSEC-Q dedicated FL-net module setting/monitoring tool
GX Configurator-PT SW^D5C-QPTU-E MELSEC-Q dedicated positioning module QD70 setting/monitoring tool
GX Configurator-AS SW^D5C-QASU-E MELSEC-Q dedicated AS-i master module setting/monitoring tool
GX Configurator-QP SW^D5C-QD75P-E MELSEC-Q dedicated positioning module QD75P/D/M setting/monitoring tool

MELSOFT MX Series

MX Component SW^D5C-ACT-E ActiveX library for communication
MX Sheet SW^D5C-SHEET-E Excel communication support tool
MX MESInterface SW1DNC-MESIF-E MES interface module QJ71MES96 dedicated information linkage tool
MX Works SW^D5C-SHEETSET-E A set of two products: MX Component, MX Sheet
Note 1) “Positive common” means using the module by connecting the common terminal to positive DC power; “negative common” means using the module by connecting the common terminal to negative DC power.
Note 2) The connector is not enclosed. Prepare A6CON1, A6CON2, A6CON3, or A6CON4 separately.
Note 3) The connector is not enclosed. Prepare A6CON1E, A6CON2E, or A6CON3E separately.
Note 4) The connector is not enclosed. Prepare A6CON1, A6CON2, or A6CON4 separately.
Note 5) The connector is not enclosed. Prepare A6CON4 separately.
Note 6) Runs in Windows command prompt.
Note 7) Depending on the combination of the power supply module and base unit, the mounting position (slot) of Q68TD-G-H01 is restricted. Refer to the manual for more details.
Note 8) If the shipping standard compliance is required, select the Q64P model.