Omron Proximity Sensors. Cylindrical. E2EQ-[]-IL[]

IO-Link Proximity Sensor (Spatter-resistant Models)
E2EQ-[]-IL[]

IO-Link Makes Sensor Level Information Visible and Solves the Three Major Issues at Manufacturing Sites! A Proximity Sensor That Can Be Used in a Spatter Environment.

DC 3-wire IO-Link Models

Appearance		Sensing distance	Connection method	Pin arrangement	IO-Link baud rate	Model
Shielded	M12	3 mm	Pre-wired Models (2 m)	--	COM2 (38.4 kbps)	E2EQ-X3B4-IL2 2M
					COM3 (230.4 kbps)	E2EQ-X3B4-IL3 2M
			M12 Pre-wired Smartclick Connector Models (0.3 m)	1: +V 3: 0 V 4: C/Q output	COM2 (38.4 kbps)	E2EQ-X3B4-M1TJ-IL2 0.3M
					COM3 (230.4 kbps)	E2EQ-X3B4-M1TJ-IL3 0.3M
	M18	7 mm	Pre-wired Models (2 m)	--	COM2 (38.4 kbps)	E2EQ-X7B4-IL2 2M
					COM3 (230.4 kbps)	E2EQ-X7B4-IL3 2M
			M12 Pre-wired Smartclick Connector Models (0.3 m)	1: +V 3: 0 V 4: C/Q output	COM2 (38.4 kbps)	E2EQ-X7B4-M1TJ-IL2 0.3M
					COM3 (230.4 kbps)	E2EQ-X7B4-M1TJ-IL3 0.3M
	M30	10 mm	Pre-wired Models (2 m)	--	COM2 (38.4 kbps)	E2EQ-X10B4-IL2 2M
					COM3 (230.4 kbps)	E2EQ-X10B4-IL3 2M
			M12 Pre-wired Smartclick Connector Models (0.3 m)	1: +V 3: 0 V 4: C/Q output	COM2 (38.4 kbps)	E2EQ-X10B4-M1TJ-IL2 0.3M
					COM3 (230.4 kbps)	E2EQ-X10B4-M1TJ-IL3 0.3M

Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file).

Accessories (Sold Separately)

Sensor I/O Connectors

(Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

Type	Appearance	Cable length	Sensor I/O Connector model number	Applicable Proximity Sensor model number
Socket on one cable end	Straight	2 m	XS5F-D421-D80-F	E2E-X[]B4-M1TJ-IL[]
	Straight	5 m	XS5F-D421-G80-F
	L-shape	2 m	XS5F-D422-D80-F
	L-shape	5 m	XS5F-D422-G80-F
Socket and plug on cable ends *	Straight/straight	2 m	XS5W-D421-D81-F
	Straight/straight	5 m	XS5W-D421-G81-F
	L-shape/L-shape	2 m	XS5W-D422-D81-F
	L-shape/L-shape	5 m	XS5W-D422-G81-F

Note: Refer to Sensor I/O Connector/Sensor Controller for details.
* There are also straight type/L-shape type combinations available.

DC 3-wire IO-Link Models

Item	Size	M12	M18	M30
	Shielded	Shielded
	Model	E2EQ-X3B4-IL[]	E2EQ-X7B4-IL[]	E2EQ-X10B4-IL[]
Sensing distance		3 mm ±10%	7 mm ±10%	10 mm ±10%
*Set distance 1**		0 to 2.4 mm	0 to 5.6 mm	0 to 8 mm
Differential travel		10% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Catalog.)
Standard sensing object		Iron, 12 × 12 × 1 mm	Iron, 18 × 18 × 1 mm	Iron, 30 × 30 × 1 mm
*Response frequency 2**		1 kHz	0.5 kHz	0.4 kHz
Power supply voltage		10 to 30 VDC (including 10% ripple (p-p))
Current consumption		20 mA max.
Control output	Load current	100 mA max.
	Residual voltage	2 V max. (Load current: 100 mA, Cable length: 2 m)
*Indicators 1**		In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and stability indicator (green, lit) In the IO-Link mode: Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals)
Operation mode		PNP NO/NC switching type (Factory setting: NO) Refer to the timing charts under I/O Circuit Diagrams on Catalog for details.
Protection circuits		Power supply reverse polarity protection, output reverse polarity protection, surge suppressor, and output short-circuit protection
Ambient temperature range		Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard cable length: 0.3 m)
Materials	Case	Fluororesin coating (Base material: brass)
	Sensing surface	Fluororesin
	Clamping nuts	Fluororesin coating (Base material: brass)
	Toothed washer	Zinc-plated iron
Main IO-Link functions		Operation mode switching between NO and NC, self diagnosis enabling, excessive proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, and initial reset
Communication specifications	IO-Link specification	Ver 1.1
	Baud rate	-IL3: COM3 (230.4 kbps), -IL2: COM2 (38.4 kbps)
	Data length	PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
	Minimum cycle time	-IL3 (COM3): 1 ms, -IL2 (COM2): 2.3 ms
Accessories		Instruction manual

Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file).
*1. In the Standard I/O mode (SIO mode), use the product in a range that the green stability indication lamp is lit. (Although the lamp is turned off when the object detected has approached excessively, the detection performance is stable.)
In the IO-Link mode, use the product in a range that the Byte1_bit4 for instability detection is zero. (Although the Byte1_bit5 for excessive proximity detection is one if the object detected has approached excessively, the detection performance is stable.)
Please contact your OMRON sales representative regarding assignment of data.
*2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.

Pre-wired Models

E2EQ-X3B4-IL[]

*1. 4-dia. vinyl-insulated round cable with 3 conductors
(Flame-resistant, Conductor cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m
*2. Operation indicator (orange), stability indicator/communication indicator (green)

E2EQ-X7B4-IL[]

*1. 6-dia. vinyl-insulated round cable with 3 conductors
(Flame-resistant, Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
*2. Operation indicator (orange), stability indicator/communication indicator (green)

E2EQ-X10B4-IL[]

Pre-wired Connector Models

E2EQ-X3B4-M1TJ-IL[]

*1. 4-dia. vinyl-insulated round cable (Flame-resistant), Standard length: 0.3 m
*2. Operation indicator (orange), stability indicator/communication indicator (green)

E2EQ-X7B4-M1TJ-IL[]

*1. 6-dia. vinyl-insulated round cable (Flame-resistant), Standard length: 0.3 m
*2. Operation indicator (orange), stability indicator/communication indicator (green)

E2EQ-X10B4-M1TJ-IL[]

*1. 6-dia. vinyl-insulated round cable (Flame-resistant), Standard length: 0.3 m
*2. Operation indicator (orange), stability indicator/communication indicator (green)

Mounting Hole Dimensions